The best just got better! Introducing the RadioMaster TX16S Mark II Radio Controller! The latest in radio controller technology and the ultimate open-source radio. Now with our version 4.0 gimbals and 4 precision bearings for an improved feel and perfect centering. A thorough redesign of the plastics has improved fit and finish and increased durability. The TX16S Mark II offers optimized power supply with reverse polarity protection and up to 2.2 amps of charging through the USB-C port. The 4.3" IPS color display provides easy programming with touch panel precision. We tried to think of everything, but just in case, we also added a DIY accessory socket for your bright ideas.
Features
- Improved internal circuitry and optimized power supply.
- New charge circuitry with integrated reverse-polarity protection.
- Optimized charge IC now allows up to 2.2A internal USB-C charge current.
- Rear-mounted audio jack provided headphone output.
- V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
- Optional high/low rear grips are included for improved ergonomics.
- Improved S1/S2 knobs with clear centre-detents.
- Improved LS/RS Sliders with smoother feel and better centre-detents.
- Redesigned battery cover for improved battery access.
- Retooled body shell with improved fit and finish.
- Trainer socket changed to standard TRS 3.5mm socket.
- Rear DIY Socket added for personalized mods.
- Improved internal plastics for better longevity.
- Built-in ExpressLRS Backpack and 4in1 versions.
EU-LBT Version
"Listen Before you Talk" is the abbreviation for a technical feature in radio transmission, which is mandatory for operation within the EU. Therefore, all our remote controls are shipped with this firmware.
This means:
- 4in1 modules are limited to the LBT-enabled protocols FrSKY X/X2 LBT, HoTT LBT, and DSMX
- ELRS modules come pre-installed with EU-approved LBT firmware and are limited to a maximum output power of 100 MW
Battery Included!
On default we ship the radio with battery included. On request we take the battery out and deduct the relevant amount! Please contact us in case you whish to purchase without battery.
Specification
| Item |
TX16S Mark II |
| Size |
287x129x184mm |
| Weight |
750g (without battery) |
| Transmission frequency |
2.400GHz-2.480GHz |
| Transmitter module |
Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401); Option 2: Internal ELRS (SX1280) |
| SD card |
256MB by default, 8GB maximum |
| Antenna gain |
2db (transmit power adjustable) |
| Working current |
400mA |
| Working voltage |
6.6-8.4v DC |
| Radio firmware |
EdgeTX |
| Module Firmware |
Multiprotocol- Module (4IN1) -OR- ExpressLRS (ELRS) |
| Channels |
Up to 16 channels (depending on the receiver) |
| Gimbal |
Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor |
| Module Bay |
JR compatible module bay |
| Upgrade method |
Supports USB-C online / SD card offline upgrade |
| Support |
EdgeTX and OpenTX. EdgeTX is installed by default (Touch screen enabled). Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later. Available in 4in1 and ELRS versions. |
Optional V4.0 Hall Gimbals and AG01 Gimbals
V4.0 HALL GIMBALS: Standard version with V4.0 Hall Gimbals, same chipset as the AG01, optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable.
Flat & Raised Grips Included: Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.
Upgraded Design
- Retooled faceplate with improved fit and finish
- Improved S1/S2 knobs with center detents
- 4.3” IPS Color Display - The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.
- Improved LS/RS Sliders with smoother feel and better centre-detents.
- New 3.5mm Audio jack - Rear mounted audio jack minimizes RF interference from external modules and adds headphone audio feature.
- Redesigned battery cover, easier to remove.
- Rear DIY Socket added for personalised mods.
Package Includes
- 1 * TX16S Mark II Radio Controller
- 1 * 18650 Tray
- 1 * USB-C Cable
- 1 * Screen Protector
- 1 pair of flat grips
- 1 pair of raised grips (installed on radio by default)
- 1 * TX16S Key Chain
- 1 * 5000mAh Li-Ion Akku
Product safety information
Manufacturer information:
Radiomaster
4/F, Yang Tian Building, Yang Tian Road, Xin'an Street, Bao'an District, Shenzhen
GuangDong, China, 518101
Responsible person:
Mahmoudi Modellsport
Kaiserstraße 6
Bayern
Schönbrunn, Deutschland, 85244
info@mahmoudishop.de
https://www.mahmoudishop.de
Register now for news and don't miss a thing
