The proven ROXXY® LiPo high-performance batteries now come in a revised EVO version. The ROXXY® EVO battery series offers decisive improvements in all performance data. While the previous ROXXY® LiPo batteries already had an above-average voltage level even at high load currents, the voltage level of the new ROXXY® EVO series has been increased once again for noticeably more "pressure". The capacity under load and the total number of cycles of the ROXXY® EVO batteries have also been noticeably increased. Furthermore, the ROXXY® EVO line is characterized by smaller dimensions and lower weight, while at the same time increasing the C-rate.
The unique ROXXY® BID chip technology for easiest handling on POWER PEAK ® chargers is integrated as standard on all ROXXY ® EVO batteries with more than 1800mAh capacity.
"The BID technology makes charging the battery immensely easier, because you don't have to worry about the settings on the charger every time ..."
How the BID system works:
A small, lightweight BID chip is assigned to each battery, which stores all relevant data for optimal charging/discharging of the battery. For charging/discharging, the BID chip and the battery are connected to a BID charger. The BID system sets the parameters for the charger. As an alternative to the BID chip, there is also the BID key. The function is the same as with the BID chip, but the handy shape of the BID key makes it easier to plug into the charger.
The following charging settings are stored in the BID-Chip/Key:
Battery type (NC, NiMH, LiIo, LiPo, LiFe, lead)
Date (e.g. first start-up)
Delta peak cut-off voltage
The following data is stored in the BID chip/key during each charging process:
Current charged capacity
Current discharged capacity
Maximum charged capacity
Maximum discharged capacity
Number of charging cycles
More information about the BID system:
Yesterday lithium-ion batteries with 3.6 volts cell voltage, today lithium-ion and lithium-ion polymer batteries with 3.7 volts, plus lithium-ferrum cells with 3.3 volts and already in the pipeline: Lithium phosphor cells with 3.6 volts.
It is easy to lose track of the settings, forget how to adjust them or, in the worst case, make the wrong settings. The revolutionary BID-System from ROXXY® offers an ingenious solution to this problem. "BID -System" stands for Battery IDentification System. Lithium batteries bring, besides a very high efficiency, also some dangers - especially in charging mode. The cause of previous cases of damage is often an incorrectly set charging program in the charger by the user (e.g. LiPO battery charged with NimH program). The revolutionary BID, which only Power-Peak® chargers and ROXXY® Evo batteries offer worldwide, prevents this danger, which should not be underestimated.